Created with Sketch. Created with Sketch.

Shop by Category

Brass Hammers

Buy Brass Hammers and Brass Sledge hammers at The Hammer Source!

ALL BRASS HAMMERS Made in USA

The Hammer Source carries a complete line of Brass Hammers. We have Brass Hammers from 1/2 lb. to 24 lbs. Can you swing a 24 lb. hammer?

To find what you need, search Brass Hammers by metal type- Yellow Brass HammersNickel Aluminum Bronze Hammers.
Yellow Brass Hammers are divided into three handle types:

Brass Hammers with Wood handles

3.0bw.jpg   15bwh24.jpg

 

 Brass Hammers with Fiberglass handles

3.0bf.jpg 3.0bnpf14.jpg

 3.0bpf16.jpg 15bfh36.jpg

 

Brass Hammers with Steel handles

3bsh.jpg


Most brass hammer heads are cast and some are extruded. The extruded heads are typically a bit harder since the process compacts and aligns the metal grain. Their dimensions are a bit more precise.

27-41000.jpg         cm150.jpg    

Brass and Copper hammers are Copper Alloys. Our hammers are made using these metal types: Yellow Brass (most common) and Nickel Aluminum Bronze.

Metal hardness comparisons can be found here.

Our Brass Hammers are cylindrical, barrel or square-shaped. You can request special handle lengths on some hammers.

Brass is considered to be non-sparking. However, The Hammer Source does not guarantee any hammer to be non-sparking. Hammers can pick up materials during use, like iron or steel, which can be imbedded in the brass and cause sparks.

Soft metal hammers like copper, aluminum and brass should be reground and dressed before each use. 

Discard hammers when they are mis-shaped, loose or deformed!

Still can't find what you need? E-mail anytime or call The Hammer Man a call toll free 630-969-1100.

Hammer ON!!


Brass hammers (click on link for specific handle types)

Brass Hammers with Wood handles
Brass Hammers with Fiberglass handles
Brass Hammers with Steel handles

Go to the Brass Hammer page of your dreams to see all the Brass Hammers!