10 oz Hard Yellow Plastic Ball Pein hammer, 2" face diameter on the flat face, 1 1/2" ball diameter

Garland 1502410 oz Hard Yellow Plastic Ball Pein hammer2" face diameter on the flat face1 1/2" ball diameter. Head length is 5 1/2"Overall length is 11 1/2"Hickory handle.

28 oz. Machinists Cross Pein, Fiberglass Handle.

12" Fiberglass handle with rubber grip.

8 oz Hard Yellow Plastic Ball Pein hammer, 1 3/8" face diameter on the flat face

Garland 15022 8 oz Hard Yellow Plastic Ball Pein hammer 1 3/8" face diameter on the flat face1" ball diameter.  9 1/4" tool length with hickory handle.

Barco 07201 11 oz. Short Head Finishing or Bumping hammer

Barco 07201  11 oz. Short Head Finishing or Bumping hammer, 7/8" square arched face, 1 1/8" round flat face, 12" Wood handle.Replacement handle: B13203  

Barco 07202 16 oz Long Head finishing or Bumping hammer

Barco  07202 16 oz Long Head finishing or Bumping hammer, 1 1/2" flat round and 1 1/2" Square raised arch face. 13" Wood handle.Replacement handle: B0289800

Barco 07204 12 oz Pointed Pick Finishing hammer

Barco  07204 12 oz Pointed Pick Finishing hammer, 1 3/8" round flat face, 13" Wood handle.Replacement handle: B0289800

Barco 07205 12 oz Pecking and Finishing hammer

Barco  07205 12 oz Pecking and Finishing hammer1 3/8" round flat, smooth face 2 1/2" pick rounded pointHead length 5 1/2" 13" Wood handle.Replacement handle: B0289800

Big Blu Repousse Hammer, Elliptical Peins, wood handle.

Big Blu BLUR3No. R-3. Elliptical Peen Repousse' Hammer- TOTAL WEIGHT is 1.7 lbs.The elliptical peens of this hammer are used for both dishing and raising techniques as well as general sheet metal work. Made from top quality forged and heat treated tool...

Big Blu Repousse Hammer, Polished parabolic peens designed for raising and shaping.

BLUR1No. R-1 Repousse' Raising Hammer- TOTAL WEIGHT IS 1.6 LBS.Head length is 7 3/4"Width of faces is about an inch. One face is more rounded, one is more angled but both faces are round and polished.Overall tool length is 14".The parabolic face of this...

Big Blu Repousse Hammer, Round and Square faces, wood handle.

Big Blu BLUR2No. R-2. Round and Square Repousse' Hammer- TOTAL WEIGHT IS 1.7 lbs.This is a general purpose metal shaping hammer with round and square faces that are slightly flat. Made from top quality forged and heat treated tool steel. Finished...

Big Blu Repousse Lining/Blocking Hammer, Narrow peen for lining and square peen for setting blocking, wood handle.

Big Blu BLUR4No. R-4 Repousse' Lining Blocking Hammer- TOTAL WEIGHT IS 1.9 lbs.The narrow face of this hammer is used for lining and the large face for dishing or blocking. It can also be used in repousse' for shaping as needed. Made from top...

Garland 15008 Bossing Mallet, 2" face diameter wood handle

Garland 15008 Plastic Bossing Mallet, 2" face diameter wood handleMallet Specifications: Face diameter: 2"Head length 5 1/4"Overall tool length: 11"Weight: 9.6 oz.Ultra-high molecular weight polyethylene hammers. Made in the USA.Buy the Bossing...

Garland Bossing Mallet Set - All three sizes of our hard yellow bossing mallets-

Garland Bossing Mallet set- 3 bossing mallets. Buy the set and save $15.97!This set includes three sizes, face diameters (at the widest point): 15010= 3"15009= 2 1/2"15008= 2" Hammers are Ultra-high molecular weight polyethylene. Made in the USA.

Nupla 12 oz. Ball Pein Hammer, 12" Fiberglass Handle.

Nupla 21012 (M-12) Nupla 12 oz. Ball Pein Hammer, 12" Fiberglass Handle.

Nupla 12 oz. Engineer's Cross Pein, Fiberglass Handle

Nupla EC12 12 oz. Engineer's Cross Pein, Fiberglass Handle1" diameter flat face7/8" cross pein face widthHead length 3 3/4"Overall tool length 12"Notched rubber grip

Nupla 16 oz. Ball Pein, 13" Fiberglass Handle.

Nuipla M-16 (21017)Nupla 16 oz. Ball Pein, 13" Fiberglass Handle.

Nupla 20 oz. Ball Pein Hammer, 13" Fiberglass Handle.

Nupla 24 oz. Ball Pein, 14" Fiberglass Handle.

Nupla 21024 (M-24)

Nupla 40 oz. Ball Pein Hammer, 16" Fiberglass Handle.

Nupla 21040 (M-40)Nupla 40 oz. Ball Pein Hammer, 16" Fiberglass Handle.Straight Rubber Grip

Nupla 4oz Ball Pein, cushioned grip 11" fiberglass handle

Nupla 8 oz. Ball Pein Hammer, 11" Fiberglass Handle

Nupla M-8  8 oz. Ball Pein Hammer 12" fiberglass handle with black rubber grip.

Picard 1 1/2 lb. Engineers Cross Pein Hammer, hickory handle

Picard 1002-0700  700gm (1 1/2 lb) Engineers Cross Pein Hammer, hickory handle

Picard 1 lb. Engineers Cross Pein Hammer, wood handle

Picard 10 Piece Bumping Tool set in sheet metal box, 4 hammers, 4 dollies, 2 Pry spoons. Click on image for details.

Picard 10 Piece Bumping Tool set in sheet metal box, 4 hammers, 4 dollies, 2 Pry spoons. Click on image for details. 10 Piece Tool Set: 1. P2510100 1150gm Double dolly, large and small faces2. P2510200 920gm Double doll, small, large and small faces3...

Picard 100 gm DIN 1041 Machinists Hammer, click for details.

Picard 100 gm DIN 1041 Machinists Hammer10 1/2" wood handle.

Picard 1000 gm (2.2 lb) Polishing Hammer, 41 mm faces, one domed, one flat, wood handle.

Picard 1000 gm (2.2 lb) Polishing Hammer, 41mm (1 1/2") faces, one domed, one flat, wood handle.Head length is 5 1/2"Overall length is 14"Overall weight is 2.4 lbs.

Picard 1000 gm (2.2 lb.) DIN 1041 Machinists Hammer with 14" wood handle

Picard P102-1000 1000 gm (2.2 lb.) DIN 1041 Machinists Hammer with 14" wood handleHead length: 5 ¼” 13.3 cm Face: 1 ½” 3.8 cm Blade width: 1 ½” 3.8 cm Overall length: 14 1/8” 35.8 cm Weight: 2.65 lbs 1.2...

Picard 1000gm (2lb) Embossing, click for details.

35mm and 38mm domed faces (1 1/4" and 1 1/2", head is 8 1/4" long. 15" Wood handle. Call us if you need additional details.

Picard 1000gm Polishing Hammer.

P17001-1000Picard 1000gm Polishing Hammer.42mm domed and 41mm crowned facesHead length is 5 1/2"Overall length is 14"

Picard 102-1250 1250 gm DIN 1041 Machinists Hammer, 10 1/2" tool length, wood handle

Picard 102-1250 Picard 102-1250 1250 gm DIN 1041 Machinists Hammer, 10 1/2" tool length, wood handle Head length: 5 ½”        14 cm Face diameter: 1 ½”    3.8 cm Blade width: 1...

Picard 13oz Tinners Opposite Pein Grooving, 29mmx7mm and 30mmx8mm faces. Wood handle

Picard 17591-0375 Tinners Opposite Pein hammer.Straight rounded blades, each 1 1/8" wide.One cross pein (perpendicular to handle), one Straight Pein (parallel to handle).Head length is 5"Overall length is 12"

Picard 150 gm DIN 1041 Machinists Hammer with 10 1/2" wood handle

Picard 150 gm DIN 1041 Machinists Hammer with 10 1/2" wood handleFace diameter: 5/8" Head length: 3 1/2" Tool length: 10 3/4"

Picard 1500 gm (3.3 lb) DIN 1041 Machinists Hammer, 16 inch tool length, wood handle.

Picard 1500 gm (3.3 lb) DIN 1041 Machinists Hammer, 16 inch tool length, wood handle.

Picard 170 gm Silversmith's Planishing Hammer, 1 flat, 1 rounded face, wood handle

Picard 175gm (6oz) Embossing, 16mm and 18mm crowned faces. Wood handle

Picard 17401-0175Picard 175gm (6oz) Embossing, 16mm and 18mm crowned faces. Wood handle

Picard 18211-1000 1000 gm (2.2 lb.) Polishing Hammer

Picard P18211-10001000gm (2.2 lbs) Polishing Hammer Head length: 4 ¼” 10.8 cm Face: 1 ¾” 4.4 cm Length: 15” 38 cm Weight: 2.4 lbs 1.08 kg 46mm single domed face (1.8" diameter) Wood handle.

Picard 2 lb. Engineers Cross Pein Hammer, wood handle

Picard 1002-0700 900 gm (2 lb.) Engineers Cross Pein Hammer, wood handle

Picard 200 gm DIN 1041 Machinists Hammer, click for details

Picard P102-0200  200 gm DIN 1041 Machinists Hammer, click for detailsHead length: 3 ¾”        9.5 cm Face diameter: ¾”       1.9 cm Blade width:...

Picard 200 gm Planishing Hammer, 21mm round faces, flat and raised, wood handle

Picard P16701-0200  200 gm Planishing Hammer, 21mm round faces, flat and raised, wood handleHead length: 5” 12.7 cm Face: ¾” 1.9 cm Length: 11 ½” 29 cm Weight: 0.6 lbs 0.27 kg

Picard 2000 gm (4.4 lb.) DIN 1041 Machinists Hammer, 15 3/4" tool length wood handle

Picard 102-2000   2000 gm (4.4 lb.) DIN 1041 Machinists Hammer, 15 3/4" tool length wood handle

Picard 200gm (7oz) Bording Hammer, 20mmx4mm and 20mmx6mm faces. Wood handle

Picard 20501-22 22 mm face diameter Chasing/Repousse Hammer, wood handle.

Picard 20501-22  22 mm face diameter Chasing/Repousse Hammer, wood handle.80 gm head weight110 gm overall weight

Picard 20501-26 26 mm face diameter Chasing/Repousse Hammer, wood handle

Picard 20501-26  26 mm face diameter Chasing/Repousse Hammer, wood handleHead weight is 100 gmOverall weight is 120 gm

Picard 20501-28 28 mm face diameter Chasing/Repousse Hammer, wood handle

Picard 20501-28  28 mm face diameter Chasing/Repousse Hammer, wood handleHead weight is 130 gmOverall weight is 140 gm

Picard 20501-30 30 mm face diameter Chasing/Repousse Hammer, wood handle

Picard 20501-30  30 mm face diameter Chasing/Repousse Hammer, wood handleHead weight is 150 gmOverall weight is 170 gm

Picard 250 gm DIN 1041 Machinists Hammer with 11 1/2" wood handle

Picard 250 gm DIN 1041 Machinists Hammer with 11 1/2" wood handle Head length: 3 7/8” 9.8 cm Face: 7/8” 2.2 cm Blade width: 7/8” 2.2 cm Overall length: 11 3/8” 28.9 cm Weight: 0.8 lbs .36 kg

Picard 250 gm Polishing Hammer, 24mm domed face, 24mm flat face, wood handle.

Picard 16901-0250  250 gm Polishing Hammer, 24mm domed face, 24mm flat face, wood handle.

Picard 250gm (9 oz) Stretching Hammer, single Convex face 35mm, Wood handle

Picard P18201-0250  250gm (9 oz) Stretching Hammer, single Convex face 35mm, Wood handleHead length: 3” 7.6 cm Face: 1” 2.5 cm Length: 11 ½” 29.2 cm Weight: 0.65 lbs 0.3 kg

Picard 250gm (9oz) Chasing hammer, 20mm x18mm and 24mmx22mm round crowned faces.

Picard 250gm (9oz) Chasing hammer, 20mm x18mm and 24mmx22mm round crowned faces.

Picard 250gm (9oz) Embossing, 20mm and 23mm crowned faces. Wood handle

Picard 17401-0250Picard 250gm (9oz) Embossing, 20mm and 23mm crowned faces.  Wood handle Head length: 5” 12.7 cm Face 1: 1” 2.5 cm Face 2: ¾” 1.9 cm Length: 11 ½” 29.2 cm Weight: 0.7 lbs 0.3 kg

Picard 250gm (9oz) Grooving hammer, 31mm x 10mm and 21mm x 12mm faces. Wood handle

Striking ends are straight and rounded over.

Picard 250gm Polishing Hammer, click for details

Picard P17001-0250  250gm Polishing Hammer24mm domed and 24mm crowned facesHead length 4"Overall tool length 11 1/2"12 oz overall weight.