Nupla 14" Fiberglass poly clad handle, notched grip 0.735" x 0.453"

Product Description

Nupla IPE75-14SG  14" Fiberglass poly clad handle, notched grip 0.735" x 0.453"

You need at least 1/8" epoxy around the handle- 1/4" is better.

This handle comes with ONE BK-24 2 part epoxy kit. 2 kits is better than 1.

To replace a fiberglass handle:

1. Tape the bottom of the hammer head with masking tape.
2. Mix the two part epoxy- THOROUGHLY.
3. Pour some epoxy into the head.
4. Place the handle into the head, and secure the handle to something (you will need to rig a jig).
5. Pour the rest of the epoxy around the handle.
6. DO NOT DISTURB FOR AT LEAST 24 HOURS, LONGER IF LESS THAN 70 DEGREES.