Nupla IP118-36 34" Super Grip Fiberglass Handle 1.124" by .772" eye, 6-20lb

Product Description

Nupla IP118-36 34" Straight Grip Fiberglass Handle 1.124" by .772" eye, for 6-20 lb hammers.

You need a minimum of 1/8" epoxy around the handle, 1/4" is better.

This handle comes with ONE BK-24 2 part epoxy kit.

 To replace a fiberglass handle:

1. Tape the bottom of the hammer head with masking tape.
2. Mix the two part epoxy- THOROUGHLY.
3. Pour some epoxy into the head.
4. Place the handle into the head, and secure the handle to something (you will need to rig a jig).
5. Pour the rest of the epoxy around the handle.
6. DO NOT DISTURB FOR AT LEAST 24 HOURS, LONGER IF LESS THAN 70 DEGREES.