Nupla 11" Fiberglass handle, Rubber Grip, .433" by .297".

Product Description

Nupla 11" Fiberglass handle, Rubber Grip,

Handle diameter is .433" by .297".

You need at least 1/8" epoxy around the handle- 1/4" is better.

2 kits is better than 1.

This handle comes with ONE BK-24 2 part epoxy kit.

To replace a fiberglass handle:

1. Tape the bottom of the hammer head with masking tape.
2. Mix the two part epoxy- THOROUGHLY.
3. Pour some epoxy into the head.
4. Place the handle into the head, and secure the handle to something (you will need to rig a jig).
5. Pour the rest of the epoxy around the handle.
6. DO NOT DISTURB FOR AT LEAST 24 HOURS, LONGER IF LESS THAN 70 DEGREES.