Nupla 14" Fiberglass Handle, notched rubber grip, .961" by .586"

Product Description

Nupla IP95-14SG  14"   Fiberglass Handle, notched rubber grip, .961" by .586"

You need 1/8" minimum epoxy around the handle- 1/4" is better.

This handle comes with ONE BK-24 2 part epoxy kit.

 To replace a fiberglass handle:

1. Tape the bottom of the hammer head with masking tape.
2. Mix the two part epoxy- THOROUGHLY.
3. Pour some epoxy into the head.
4. Place the handle into the head, and secure the handle to something (you will need to rig a jig).
5. Pour the rest of the epoxy around the handle.
6. DO NOT DISTURB FOR AT LEAST 24 HOURS, LONGER IF LESS THAN 70 DEGREES.

I recommend getting at least 1 extra BK-24 epoxy kit.